Publications

Refereed Journal Papers

  1. Shen, N., Samanta, A., Wang, Q., and Ding, H., 2017, “Selective Laser Melting of Fiber-Reinforced Glass Composites,” SME, Manufacturing LettersLink
  2. Liu, S., Chen, S., Wang, Q., Li, Y., Zhang, H., and Ding, H., 2017, “Analysis of Plasma Characteristics and Conductive Mechanism of Laser Assisted Pulsed Arc Welding", Optics and Lasers in EngineeringLink
  3. Liu, Z., Wu, B., Samanta, A., Shen, N., Ding, H., Xu, R., and Zhao, K., 2017, "Ultrasound-assisted Water-Confined Laser Micromachining (UWLM) of Metals: Experimental Study and Time-Resolved observation", Journal of Materials Processing TechnologyLink
  4. Shen, N., Ding, H., Pu, Z., Jawahir, I. S., and Jia, T., 2017, "Enhanced Surface Integrity from Cryogenic Machining of AZ31B Mg Alloy: a Physics-based Analysis with Microstructure Prediction,Transactions of the ASME,Journal of Manufacturing Science and EngineeringLink
  5. Zhang, B., Wang, Q., Shen, N., and Ding, H., 2017, "Experimental Investigation and Numerical Analysis of Mechanical Ruling for an Aluminum Coated Diffraction Grating,Transactions of the ASME,Journal of Manufacturing Science and EngineeringLink
  6. Shen, N., Samanta, A., Ding, H., and Cai, W., 2016, "Simulating Microstructure Evolution of Battery Tabs during Ultrasonic Welding," SME, Journal of Manufacturing ProcessesLink
  7. Narvan M., Abdi Behnagh R., Shen N., Besharati Givi M. K., and Ding H., 2016, “Shear Compaction Processing of SiC Nanoparticles Reinforced Magnesium Composites Directly from Magnesium Chips,” SME Journal of Manufacturing Processes. Link
  8. Liu, S., Li, Y., Liu, F., Zhang, H., and Ding, H., 2016, "Effects of Relative Positioning of Energy Sources on Weld Integrity for Hybrid Laser Arc Welding," Optics and Lasers in Engineering. Link
  9. Shen, N., Ding, H., Wang, Q., and Ding, H., 2016, "Effect of Confinement on Surface Modification for Laser Peen Forming without Protective Coating," Surface and Coatings Technology. Link
  10. Ansari, M. A., Narvan, M., Abdi Behnagh, R., Naeini, E. S., Besharati Givi, M. K., and Ding, H., 2016, "Optimization of Friction Stir Extrusion (FSE) Parameters through Taguchi Technique," Transactions of the Indian Institute of MetalsLink 
  11. Abdi-Behnagh, R., Shen, N., Ansari, M. A., Narvan, M., Besharati-Givi, M. K.,Ding, H., 2015, "Experimental Analysis and Microstructure Modeling of Friction Stir Extrusion of Magnesium Chips,Transactions of the ASME,Journal of Manufacturing Science and EngineeringLink
  12. Malaki, M., and Ding, H., 2015, "A Review of Ultrasonic Peening Treatment," Materials & DesignLink 
  13. Shen, N., Ding, H., Bowers, R., Yu, Y., Pence, C. N., Ozbolat, I., and Stanford, C. M., 2015, "Surface Micro-Patterning of Pure Titanium for Biomedical Applications via High Energy Pulse Laser Peening," Transactions of the ASME, Journal of Micro and Nano-ManufacturingLink
  14. Shen, N. and Ding, H., 2014, "Physics-based microstructure simulation for drilled hole surface in hardened steel," Transactions of the ASME, Journal of Manufacturing Science and EngineeringLink
  15. Liu, Z., Gao, Y., Wu, B., Shen, N., and Ding, H., 2014, "Ultrasound-assisted Water-Confined Laser Micromachining: a Novel Machining Process," Manufacturing Letters. Link
  16. Ding, H., and Shin, Y. C., 2014, "Dislocation density-based grain refinement modeling of orthogonal cutting of titanium," Transactions of the ASME, Journal of Manufacturing Science and EngineeringLink
  17. Shayan, M., Mohammadpour, M., Malaki, M., and Ding, H., 2014, "Springback Analysis of Two-Layer Strips in Clad Cold Bimetal Bending," Transactions of the Indian Institute of MetalsLink

  18. Gao, Y., Wu, B., Liu, Z., Zhou, Y., Shen, N. and Ding, H., 2013, "Ultrasonic cavitation peening of stainless steel and nickel alloy," Transactions of the ASME, Journal of Manufacturing Science and EngineeringLink

  19. Shen, N. and Ding, H., 2013, "Thermo-mechanical coupled analysis of laser-assisted mechanical micromilling of difficult-to-machine metal alloys used for bio-implant," International Journal of Precision Engineering and ManufacturingLink
  20. Pence, C. N., Ding, H., Shen, N. and Ding, H., 2013, "Experimental analysis of sheet metal micro-bending using a nanosecond-pulsed laser", International Journal of Advanced Manufacturing Technology. Link
  21. Ding, H. and Shin, Y. C., 2013, "Improving machinability of high chromium wear-resistant materials via laser-assisted machining", Machining Science and Technology. Link
  22. Ding, H. and Shin, Y. C., 2013, "Multi-physics modeling and simulations of surface microstructure alteration in hard turning", Journal of Materials Processing Technology. Link
  23. Ding, H. and Shin, Y. C., 2013, "Improvement of machinability of waspaloy via laser-assisted machining", International Journal of Advanced Manufacturing Technology. Link
  24. Ding, H. and Shin, Y. C., 2012, "A metallo-thermomechanically coupled analysis of orthogonal cutting of AISI 1045 steel", Transactions of the ASME. Journal of Manufacturing Science and Engineering. Link
  25. Ding, H. and Shin, Y. C., 2012, "Dislocation density-based modeling of subsurface grain refinement with laser-induced shock compression", Computational Materials Science. Link
  26. Ding, H., Shen, N., and Shin, Y. C., 2012, "Thermal and mechanical modeling analysis of laser-assisted micro milling of difficult-to-machine alloys," Journal of Materials Processing TechnologyLink
  27. Ding, H., Shen, N., and Shin, Y. C., 2012, "Predictive modeling of grain refinement during multi-pass cold rolling," Journal of Materials Processing TechnologyLink
  28. Ding, H., Shen, N., and Shin, Y. C., 2011, "Modeling of grain refinement in aluminum and copper subjected to cutting", Computational Materials Science. Link
  29. Ding, H., Shen, N., and Shin, Y. C., 2011, "Experimental evaluation and modeling analysis of micro-milling of hardened H13 tool steel," Transactions of the ASME, Journal of Manufacturing Science and Engineering. Link
  30. Ding, H., and Shin, Y. C., 2010, "Laser-assisted machining of hardened steel parts with surface integrity analysis," International Journal of Machine Tools and Manufacture, 50(1), pp. 106-114. Link
  31. Luo, J., Ding, H., and Shih, A., 2005, "Induction-heated tool machining of elastomers - Part 2: Chip morphology, cutting forces, and machined surfaces," Machining Science and Technology, 9, pp. 567-588. Link
  32. Luo, J., Ding, H., and Shih, A., 2005, "Induction-heated tool machining of elastomers - Part 1: Finite difference thermal modeling and experimental validation," Machining Science and Technology, 9, pp. 547-565. Link

 

Book Chapters

  1. Ding, H., Shen, N., Samanta, A., and Cai, W., 2017, "Microstructure Evolution and Physics-Based ModelingUltrasonic Welding of Lithium-Ion Batteries, ASME PressLink

 

Refereed Conference Proceedings

  1. Shen, N., Samanta, A., Ding, H., and Cai, W. W., 2016, “Simulating Microstructure Evolution of Ultrasonic Welding of Battery Tabs,” Procedia Manufacturing, Proceedings of the 44th SME North American Manufacturing Research Conference (NAMRC), June 27 – July 1, 2016, Virginia Tech, Blacksburg, VA, USA.
  2. Wang, Q., Shen, N., Zhang, B., and Ding, H., 2016, “Mechanical Ruling of Diffraction Grating – Part II: Experimental Investigation and Numerical Simulation,” Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference, MSEC2016-8715, June 27 – July 1, 2016, Virginia Tech, Blacksburg, Virginia, USA.
  3. Wang, Q., Zhang, B., Shen, N., and Ding, H., 2016, “Mechanical Ruling of Diffraction Grating – Part I: Aluminum Film Preparation and Characterization,” Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference, MSEC2016-8713, June 27 – July 1, 2016, Virginia Tech, Blacksburg, Virginia, USA.
  4. Shen, N., and Ding, H., 2016, “Microstructure Prediction for Cryogenic Cutting Using a Physics-based Material Model,” 3rd CIRP Conference on Surface Integrity, Procedia CIRP, 45, pp. 107–110.
  5. Behnagh, R. A., Shen, N., Abdollahi, M., and Ding, H., 2016, “Ultrafine-Grained Surface Layer Formation of Aluminum Alloy 5083 by Friction Stir Processing,” 3rd CIRP Conference on Surface IntegrityProcedia CIRP, 45, pp. 243–246.
  6. Shen, N., and Ding, H., 2016, “Surface Integrity Analysis of Laser Peen Micro-bending without Protective Coating,” 3rd CIRP Conference on Surface IntegrityProcedia CIRP, 45, pp. 315–318.
  7. Shen, N., and Ding, H., "Cryogenic Cutting of AZ31B-O Mg Alloy for Improved Surface Integrity – Part I: Material Modeling," Proceedings of the 2015 ASME International Manufacturing Science and Engineering Conference, MSEC2015-9323, American Society of Mechanical Engineers, Charlotte, North Carolina, USA, June 8-12, 2015.
  8. Shen, N., Ding, H., and Gao, J., " Cryogenic Cutting of AZ31B-O Mg Alloy for Improved Surface Integrity – Part II: Physics-based Process Modeling of Surface Microstructural Alteration," Proceedings of the 2015 ASME International Manufacturing Science and Engineering Conference, MSEC2015-9324, American Society of Mechanical Engineers, Charlotte, North Carolina, USA, June 8-12, 2015.
  9. Shen, N., Pence, C. N., Bowers, R., Yu, Y., Ding, H., Stanford, C. M., and Ozbolat, I., "Surface Micro-scale Patterning for Biomedical Implant Material of Pure Titanium via High Energy Pulse Laser Peening," Proceedings of the 2014 ASME International Manufacturing Science and Engineering Conference, MSEC2014-4181, American Society of Mechanical Engineers, Detroit, MI, USA, June 9-13, 2014. Link
  10. Ding, H., Shen, N., Li, K., Bo, W., Pence, C. N., and Ding, H., "Experimental and Numerical Analysis of Laser Peen Forming Mechanisms of Sheet Metal," Proceedings of the 2014 ASME International Manufacturing Science and Engineering Conference, MSEC2014-4210, American Society of Mechanical Engineers, Detroit, MI, USA, June 9-13, 2014. Link
  11. Shen, N., Ding, H., and Li, W., "Predictive modeling of surface microstructure of hardened steel subject to drilling," Proceedings of the 2013 ASME International Mechanical Engineering Congress & Exposition, IMECE2013-64499, San Diego, CA, USA, November 15-21, 2013. Link
  12. Ding, H., and Shin, Y. C., "A metallo-thermo-mechanically coupled analysis of orthogonal cutting of AISI 1045 steel," Proc. 2012 ASME International Manufacturing Science and Engineering Conference. Link
  13. Ding, H., Shen, N., and Shin, Y. C., "Experimental and modeling analysis of micro-milling of hardened H13 tool steel," Proc. 2011 ASME International Manufacturing Science and Engineering Conference. Link
  14. Ding, H. and Shin, Y. C., "Dislocation density-based grain refinement modeling of orthogonal cutting of commercially pure titanium," ASME Best Paper Award at the 2011 ASME International Manufacturing Science and Engineering Conference in Corvallis, Oregon. Link

 

Other Conference Papers/Presentations/Posters

  1. Ding, H., Shen, N., and Pence, C., 2013, "Surface enhancement of wind turbine gears and bearings through laser-based manufacturing processes," ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE2013-64562, San Diego, CA, November 15-21, 2013. Conference Link
  2. Ding, H., 2013, "Surface enhancement and repairing of critical wind turbine components through laser-based manufacturing processes," 2013 North American Wind Energy Academy (NAWEA) Symposium, Boulder, CO, USA, August 6-9, 2013. Conference Link
  3. Shen, N., Pence, C. and Ding, H., 2013, "Laser Peening & Surface Enhancement of Wind Turbine Components," Iowa EPSCoR All Hands Meeting 2013, University of Northern Iowa, Cedar Falls, IA, July 22-23, 2013. Link
  4. Li, W., Shen, N., Christ, A. and Ding, H., 2013, "Laser Assisted Machining and Hardening of Wind Turbine Components," Iowa EPSCoR All Hands Meeting 2013, University of Northern Iowa, Cedar Falls, IA, July 22-23, 2013. Link
  5. Ding, H., 2013, "Laser Based Manufacturing of Wind Turbine Components," Iowa EPSCoR All Hands Meeting 2013, University of Northern Iowa, Cedar Falls, IA, July 22-23, 2013. Conference Link
  6. Ding, H., 2013, “Predictive Modeling of Grain Refinement in Metal Cutting and Severe Plastic Deformation Processes”, Paper presented at the 11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM2013), Shenyang, Liaoning, China, July 6-10, 2013. Conference Link
  7. Ding, H., and Pence, C., 2013, "Review of laser based manufacturing of wind turbine Components," ASME 2013 Manufacturing Science and Engineering Conference, MSEC2013-1268, Madison, Wisconsin, USA, June 10-14, 2013. Conference Link
  8. Ding, H., 2013, "Multi-physics modeling and simulations of surface microstructure alteration in hard machining using AdvantEdge," 2013 Third Wave Systems International Users Conference, Pittsburgh, PA, USA, May 15-16, 2013. Conference Link
  9. Ding, H., 2013, "Education Training & Research: Wind Energy Research & Development Efforts of the University of Iowa: Laser Based Manufacturing of Wind Turbine Components," 2013 Annual Iowa Wind Energy Association (IWEA) Wind Conference, Des Moines, Iowa, USA, March 25-27, 2013. Link
  10. Pence, C., Shen, N. and Ding, H., 2013, "Laser peening and surface enhancement of wind turbine components," 2013 Annual Iowa Wind Energy Association (IWEA) Wind Conference, Des Moines, Iowa, USA, March 25-27, 2013. Conference Link
  11. Shen, N., Pence, C. and Ding, H., 2013, "Laser assisted machining and hardening of wind turbine components," 2013 Annual Iowa Wind Energy Association (IWEA) Wind Conference, Des Moines, Iowa, USA, March 25-27, 2013. Conference Link
  12. Ding, H. and Shi, L., 2012, "Laser Based Manufacturing of Wind Turbine Components," 2012 Iowa EPSCoR Wind Energy Progress Meeting, Iowa City, Iowa, USA, November 29, 2012. Link
  13. Ding, H., 2012, "Laser materials processing for wind turbine”, Iowa EPSCoR All Hands Meeting 2012, Iowa City, Iowa, July 31, 2012. Link
  14. Ding, H., Shen, N. and Shin, Y. C., "Modeling of Grain Refinement in Aluminum and Copper Subjected to Cutting," Materials Science & Technology 2011. Link
  15. Ding, H. and Shin, Y. C., "Prediction of Nanocrytalline Microstructure During Machining of Commercially Pure Titanium," AeroMAT 2011 Conference and Exposition. Link